NSN 5306-00-115-9619
Close Tolerance Hex Head Bolt
Between 0.715 inches and 0.735 inches fastener length, double hexagon head style, between 0.180 inches and 0.190 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number 9662M72P01 for national stock number 5306001159619.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-115-9619.
-
MPN or Model
9662M72P01
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.530 inches and 0.570 inches -
Fastener Length
Between 0.715 inches and 0.735 inches -
Head Style
Double hexagon -
Head Height
Between 0.180 inches and 0.190 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Grip Diameter
Between 0.2640 inches and 0.2650 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 0.165 inches and 0.185 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
150000 pounds per square inch -
Hardness Rating
30.0 rockwell c -
Minimum Yield Strength
100000 pounds per square inch -
Surface Finish
32.0 microinches grip -
Material
Stainless steel -
Thread Series Designator
Unjf
More from these suppliers
- 4920-00-469-4452 MPN 1C6222G01Aircraft Maintenance Fixture
- 4920-00-856-9023 MPN 1C4903G1Aircraft Maintenance Fixture
- 5905-00-904-5665 MPN R984P0600AInductive Wire Wound Fixed Resistor
- 5905-00-964-2235 MPN R984P1350AInductive Wire Wound Fixed Resistor
- 4920-01-071-6013 MPN 21C5872G01Aircraft Maintenance Fixture
- 4920-01-109-0965 MPN 21C8262G01Spherical Bellcrank Puller
- 4920-01-135-3019 MPN 21C10046G01Aircraft Maintenance Fixture
- 5905-01-186-6647 MPN J165P1740AWire Wound Fixed Resistor
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-115-9619 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
9662M72P01 | General Electric Company |