NSN 5306-00-116-4089
Close Tolerance Hex Head Bolt
Between 0.828 inches and 0.875 inches fastener length, hexagon head style, between 0.172 inches and 0.204 inches head height, width between flats: between 0.490 inches and 0.502 inches .
Manufacturer part number AN175CH6A for national stock number 5306001164089.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-116-4089.
-
MPN or Model
AN175CH6A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.500 inches and 0.579 inches -
Fastener Length
Between 0.828 inches and 0.875 inches -
Head Style
Hexagon -
Head Height
Between 0.172 inches and 0.204 inches -
Width Between Flats
Between 0.490 inches and 0.502 inches -
Hole Diameter
0.070 inches -
Grip Diameter
Between 0.3112 inches and 0.3117 inches -
Thread Diameter
0.312 inches -
Grip Length
Between 0.296 inches and 0.328 inches -
Hole Quantity
1 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Hole Configuration Style
Hexagon flats -
Material
Steel comp 431 -
Material Specification
Mil-s-18732 military specification single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-192-1242 MPN AN3108B22-10PElectrical Plug Connector
- 5935-00-201-2498 MPN AN3106M28-9SElectrical Plug Connector
- 5975-00-284-6662 MPN AN3055-44-24Electrical Conduit Adapter
- 5935-00-497-9966 MPN AN3106B22-18PElectrical Plug Connector
- 5935-00-644-7182 MPN AN3106A36-7SWElectrical Plug Connector
- 5305-00-144-3801 MPN AN526-640R36Machine Screw
- 5305-00-150-9732 MPN AN501-516-10Machine Screw
- 5305-00-151-1313 MPN AN509-8R22REV2Machine Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-116-4089 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN175CH6A | Aeronautical Standards Group |