NSN 5306-00-116-7791
Wheel Bolt
1.250 inches fastener length, double hexagon w/hole head style, 0.260 inches head height, width between flats: between 0.243 inches and 0.251 inches .
Manufacturer part number MS9556-18 for national stock number 5306001167791.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-116-7791.
-
MPN or Model
MS9556-18
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.630 inches and 0.690 inches -
Fastener Length
1.250 inches -
Head Style
Double hexagon w/hole -
Head Height
0.260 inches -
Width Between Flats
Between 0.243 inches and 0.251 inches -
Extended Washer Diameter
0.375 inches -
Extended Washer Thickness
Between 0.040 inches and 0.050 inches -
Thread Diameter
0.190 inches -
Grip Length
Between 0.560 inches and 0.620 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
130000 pounds per square inch -
Hardness Rating
248.0 brinell standard and 341.0 brinell standard -
Minimum Yield Strength
85000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams 5731 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-038-6319 MPN MS27467E17B35PElectrical Plug Connector
- 5940-00-082-4662 MPN MS27249-3BTerminal Board
- 5905-00-106-9349 MPN MS35043-34Composition Fixed Resistor
- 5940-00-115-5001 MPN MS20659-135Lug Terminal
- 5930-00-126-1667 MPN MS24655-311Toggle Switch
- 5935-00-149-3474 MPN MS3102A22-22PElectrical Receptacle Connector
- 5935-00-162-1563 MPN MS17348R24N12PElectrical Receptacle Connector
- 5935-00-166-0219 MPN MS3101F12S3SElectrical Plug Connector
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-116-7791 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS9556-18 | Military Standards |
Stock Check
- NE: 12133
- AR: 8
- NS: 1077
- SV: 3