NSN 5306-00-118-2940
Wheel Bolt
0.750 inches fastener length, double hexagon w/hole head style, 0.375 inches head height, width between flats: between 0.367 inches and 0.376 inches .
Manufacturer part number MS21281-08 for national stock number 5306001182940.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-118-2940.
-
MPN or Model
MS21281-08
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.667 inches and 0.750 inches -
Fastener Length
0.750 inches -
Head Style
Double hexagon w/hole -
Head Height
0.375 inches -
Width Between Flats
Between 0.367 inches and 0.376 inches -
Extended Washer Diameter
0.500 inches -
Extended Washer Thickness
Between 0.070 inches and 0.080 inches -
Thread Diameter
0.312 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
130000 pounds per square inch -
Hardness Rating
248.0 brinell standard and 341.0 brinell standard -
Minimum Yield Strength
85000 pounds per square inch -
Surface Finish
63.0 microinches bearing surface of head -
Material
Iron alloy 660 -
Material Specification
Ams 5735 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-004-2092 MPN MS27473E22B2PElectrical Plug Connector
- 5935-00-042-3666 MPN MS3103-12S-3PWElectrical Receptacle Connector
- 5905-00-088-0635 MPN RW59G471Inductive Wire Wound Fixed Resistor
- 5905-00-101-7817 MPN MS35044-39Composition Fixed Resistor
- 5905-00-111-1681 MPN MS35350-133Composition Fixed Resistor
- 5935-00-140-6375 MPN MS24266R18T31S7Electrical Plug Connector
- 5935-00-147-9551 MPN MS27508E12B98SElectrical Receptacle Connector
- 5940-00-177-6758 MPN MS18121-312Grounding Metallic Shielded Cable Ferrule
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-118-2940 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21281-08 | Military Standards |