NSN 5306-00-119-1753
Coaxial Connector
Between 0.595 inches and 0.642 inches fastener length, between 0.130 inches and 0.150 inches head height, between 0.367 inches and 0.376 inches width between flats, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number BM55132-3-6 for national stock number 5306001191753.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-119-1753.
-
MPN or Model
BM55132-3-6
-
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Length
Between 0.210 inches and 0.277 inches -
Fastener Length
Between 0.595 inches and 0.642 inches -
Head Height
Between 0.130 inches and 0.150 inches -
Width Between Flats
Between 0.367 inches and 0.376 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Grip Length
Between 0.365 inches and 0.385 inches
More from these suppliers
- 5305-00-180-4842 MPN NAS1101E3-18Machine Screw
- 5305-00-283-7457 MPN BM33024V5-6UClose Tolerance Screw
- 5305-01-014-7273 MPN NAS1189E3P10NSocket Head Cap Screw
- 5305-01-034-2821 MPN BA45095-4-8Machine Screw
- 5305-01-043-3128 MPN D16156Leveling Screw
- 5305-01-062-1057 MPN BACB30RF6P10Close Tolerance Screw
- 5305-01-123-7099 MPN E516-408Machine Screw
- 5305-01-141-7190 MPN HT4049-6D14XShoulder Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-119-1753 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BM55132-3-6 | Sps Technologies, Llc |
VS2102-3-6 | Alcoa Global Fasteners, Inc. |
202-15520-3-6 | Triumph Aerostructures, Llc |
BM55132-3-6 | Huck International, Inc. |
BM55132-3-6 | Huck Intl Inc |