NSN 5306-00-119-6718
Close Tolerance Hex Head Bolt
Between 0.928 inches and 0.948 inches fastener length, double hexagon w/hole head style, between 0.320 inches and 0.340 inches head height, width between flats: between 0.304 inches and 0.313 inches .
Manufacturer part number 3011T71P03 for national stock number 5306001196718.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-119-6718.
-
MPN or Model
3011T71P03
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.543 inches and 0.583 inches -
Fastener Length
Between 0.928 inches and 0.948 inches -
Head Style
Double hexagon w/hole -
Head Height
Between 0.320 inches and 0.340 inches -
Width Between Flats
Between 0.304 inches and 0.313 inches -
Extended Washer Diameter
Between 0.428 inches and 0.448 inches -
Extended Washer Thickness
Between 0.060 inches and 0.070 inches -
Grip Diameter
Between 0.2490 inches and 0.2493 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 0.365 inches and 0.385 inches -
Thready Qty Per Inch (tpi)
28 -
Hardness Rating
32.0 rockwell c and 42.0 rockwell c -
Surface Finish
32.0 microinches grip -
Material
Nickel alloy -
Material Specification
Ams 5708 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 4920-00-571-9097 MPN 21C1206P010Frame Protector
- 4920-01-541-8471 MPN 21C4422G01Gg Centering An Set
- 4920-01-500-1602 MPN 30R0253G01Aircraft Maintenance Fixture
- 4920-01-062-0277 MPN 21C1360G003Pressure Check Kit
- 4920-00-111-2979 MPN 21C1396G001 Assembling Fixture
- 5305-00-081-0818 MPN 3011T50Machine Screw
- 5306-01-003-7837 MPN 3011T71P09Shoulder Bolt
- 5320-01-443-5733 MPN 5108T62P04Blind Rivet
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-119-6718 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
3011T71P03 | General Electric Company |