NSN 5306-00-121-2674
Wheel Bolt
1.250 inches fastener length, hexagon head style, 0.156 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number MS9490-18 for national stock number 5306001212674.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-121-2674.
-
MPN or Model
MS9490-18
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.750 inches and 0.810 inches -
Fastener Length
1.250 inches -
Head Style
Hexagon -
Head Height
0.156 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 0.440 inches and 0.500 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
130000 pounds per square inch -
Hardness Rating
248.0 brinell standard and 341.0 brinell standard -
Minimum Yield Strength
85000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams 5731 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-00-050-6370 MPN MS35448-7Lug Terminal
- 5905-00-069-3917 MPN MS35834-389Film Fixed Resistor
- 5935-00-090-7062 MPN MS3152R16Electrical Connector Cable Clamp
- 5905-00-104-8352 MPN MS35044-129Composition Fixed Resistor
- 5935-00-114-8768 MPN MS90557C32412SElectrical Plug Connector
- 5935-00-236-8252 MPN MS3102A18-8PElectrical Receptacle Connector
- 5975-00-240-2646 MPN MS39081-16Electrical Conduit Locknut
- 5935-00-254-1399 MPN MS24265R18B8S7Electrical Receptacle Connector
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-121-2674 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS9490-18 | Military Standards |
Stock Check
- NS: 184
- NE: 2328
- AR: 1