NSN 5306-00-121-7911
Wheel Bolt
1.188 inches fastener length, double hexagon w/hole head style, 0.300 inches head height, width between flats: between 0.305 inches and 0.313 inches .
Manufacturer part number MS9557-17 for national stock number 5306001217911.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-121-7911.
-
MPN or Model
MS9557-17
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.750 inches and 0.810 inches -
Fastener Length
1.188 inches -
Head Style
Double hexagon w/hole -
Head Height
0.300 inches -
Width Between Flats
Between 0.305 inches and 0.313 inches -
Extended Washer Diameter
0.438 inches -
Extended Washer Thickness
Between 0.060 inches and 0.070 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 0.378 inches and 0.438 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
130000 pounds per square inch -
Hardness Rating
248.0 brinell standard and 341.0 brinell standard -
Minimum Yield Strength
85000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams 5731 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5930-00-112-4326 MPN MS8805/99-025Push Switch
- 5950-00-114-5631 MPN MS75089-43Radio Frequency Coil
- 5935-00-125-0758 MPN MS17346R24C28PXElectrical Receptacle Connector
- 5940-00-143-4771 MPN MS20536-103Lug Terminal
- 5940-00-143-4794 MPN MS25036-12Lug Terminal
- 5935-00-201-4615 MPN MS3106E24-7PElectrical Plug Connector
- 5935-00-236-5992 MPN MS24014-1Electrical Receptacle Connector
- 5940-00-243-3688 MPN MS18121-297Grounding Metallic Shielded Cable Ferrule
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-121-7911 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS9557-17 | Military Standards |