NSN 5306-00-121-7924
Wheel Bolt
2.250 inches fastener length, double hexagon w/hole head style, 0.260 inches head height, width between flats: between 0.243 inches and 0.251 inches .
Manufacturer part number MS9556-30 for national stock number 5306001217924.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-121-7924.
-
MPN or Model
MS9556-30
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.630 inches and 0.690 inches -
Fastener Length
2.250 inches -
Head Style
Double hexagon w/hole -
Head Height
0.260 inches -
Width Between Flats
Between 0.243 inches and 0.251 inches -
Extended Washer Diameter
0.375 inches -
Extended Washer Thickness
Between 0.040 inches and 0.050 inches -
Thread Diameter
0.190 inches -
Grip Length
Between 1.560 inches and 1.620 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
130000 pounds per square inch -
Hardness Rating
248.0 brinell standard and 341.0 brinell standard -
Minimum Yield Strength
85000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams 5731 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5975-00-096-2719 MPN MS17848PC2Junction Box
- 5935-00-258-0203 MPN MS27499E16B26PElectrical Receptacle Connector
- 5935-00-259-5991 MPN MS3108B16S-1PElectrical Plug Connector
- 5975-00-280-6079 MPN MS39081-10Electrical Conduit Locknut
- 5935-00-293-1626 MPN MS18160-2NElectrical Connector Insert
- 5935-00-320-7104 MPN MS17346R16N10PElectrical Receptacle Connector
- 5930-00-403-8848 MPN MS24547-2Sensitive Switch
- 5905-00-432-0461 MPN RNC60H2941FMFilm Fixed Resistor
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-121-7924 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS9556-30 | Military Standards |