NSN 5306-00-121-8844
Close Tolerance Hex Head Bolt
W/retaining element on shank.
Manufacturer part number 106467-4-10 for national stock number 5306001218844.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-121-8844.
-
MPN or Model
106467-4-10
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.282 inches and 0.333 inches -
Fastener Length
Between 1.043 inches and 1.063 inches -
Head Style
Dished hexagon -
Head Height
Between 0.126 inches and 0.141 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Grip Diameter
Between 0.2483 inches and 0.2492 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Thread Diameter
0.250 inches -
Grip Length
Between 0.625 inches and 0.641 inches -
Thready Qty Per Inch (tpi)
28 -
Hardness Rating
36.0 rockwell c and 41.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.943 inches first hole and 0.973 inches first hole -
Surface Finish
63.0 microinches grip -
Material
Steel -
Material Specification
Mil-b-83050 military specification single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 2 federal specification all treatment responses -
Thread Series Designator
Unjf
More from these suppliers
- 1680-01-618-7732 MPN FT5466-5-8LPanel Fastener Nrp
- 5305-00-795-2637 MPN CA2899-5-15SPanel Screw Assembly
- 5305-01-004-4094 MPN CA2651-6-43Close Tolerance Screw
- 5305-01-047-6247 MPN CA2630-0447Close Tolerance Screw
- 5306-00-121-8911 MPN CA4510-4-16Close Tolerance Bolt
- 5935-00-496-7171 MPN MS27488-20Electrical Connector End Seal Plug
- 5940-01-413-3010 MPN NAS1063B249-258Terminal Board Marker Strip
- 5305-00-052-5949 MPN MS35198-8Machine Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-121-8844 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
106467-4-10 | Sps Technologies, Llc |
AS194-4-10 | Avibank Mfg., Inc. |
MS27576-4-10 | National Aerospace Standards |
MS27576-4-10 | Military Standards |
CA4510-4-10 | Arconic Global Fasteners & Rings, |