NSN 5306-00-121-9937
Close Tolerance Hex Head Bolt
1.844 inches fastener length, hexagon head style, 0.125 inches head height, width between flats: between 0.490 inches and 0.502 inches .
Manufacturer part number LS580-5-48 for national stock number 5306001219937.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-121-9937.
-
MPN or Model
LS580-5-48
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.298 inches -
Fastener Length
1.844 inches -
Head Style
Hexagon -
Head Height
0.125 inches -
Width Between Flats
Between 0.490 inches and 0.502 inches -
Grip Diameter
Between 0.3115 inches and 0.3120 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole -
Thread Diameter
0.312 inches -
Grip Length
1.500 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.688 inches first hole -
Material
Steel comp 4130 -
Material Specification
Sae assn standard single material response -
Surface Treatment
Cadmium head -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-009-0765 MPN 4N12453-103ATroop Compartment Trim Support
- 1560-00-015-2479 MPN 3C90004-133Chain And Cable Assembly
- 1560-00-021-8543 MPN 3A99010-103Aircraft Thermal Insulation Pipe Covering
- 1560-00-022-8769 MPN 781704-45Tube
- 1560-00-034-3511 MPN 4F30001-601AAircraft Access Cover
- 5945-00-050-0394 MPN V3B90063-103Electromagnetic Relay
- 5905-00-076-4145 MPN 4A90127-101AElectrical Resistor
- 1560-00-085-7172 MPN 4E33129-101BStowage Box Assembly
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-121-9937 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LS580-5-48 | Lockheed Martin Corporation |