NSN 5306-00-121-9944
Close Tolerance Hex Head Bolt
1.906 inches fastener length, hexagon head style, 0.125 inches head height, width between flats: between 0.740 inches and 0.752 inches .
Manufacturer part number LS580-8-48 for national stock number 5306001219944.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-121-9944.
-
MPN or Model
LS580-8-48
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.360 inches -
Fastener Length
1.906 inches -
Head Style
Hexagon -
Head Height
0.125 inches -
Width Between Flats
Between 0.740 inches and 0.752 inches -
Grip Diameter
Between 0.4990 inches and 0.4995 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole -
Thread Diameter
0.500 inches -
Grip Length
1.500 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.750 inches first hole -
Material
Steel comp 4130 -
Material Specification
Sae assn standard single material response -
Surface Treatment
Cadmium head -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-008-9519 MPN 4F22438-109ARotating Shaft Eye Bracket
- 1560-00-009-5944 MPN 4F22441-108ARotating Shaft Eye Bracket
- 1560-00-015-4913 MPN 3W23324-102Flap Panel Assembly
- 1560-00-030-2749 MPN 767147-1No Bracket Assembly
- 1680-00-042-8306 MPN 3302098-1Fuel Backing Plate
- 5950-00-061-1570 MPN 4B97550-105APower Transformer
- 1560-00-069-7726 MPN 3F31323-113Radome Frame Assembly
- 1560-00-072-7819 MPN 3P30507-101Fireshield Fitting
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-121-9944 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LS580-8-48 | Lockheed Martin Corporation |