NSN 5306-00-122-0048
Wheel Bolt
Between 2.527 inches and 2.567 inches fastener length, hexagon head style, between 0.209 inches and 0.229 inches head height, width between flats: between 0.553 inches and 0.565 inches .
Manufacturer part number 177095 for national stock number 5306001220048.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-122-0048.
-
MPN or Model
177095
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.349 inches and 0.369 inches -
Fastener Length
Between 2.527 inches and 2.567 inches -
Head Style
Hexagon -
Head Height
Between 0.209 inches and 0.229 inches -
Width Between Flats
Between 0.553 inches and 0.565 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole and 0.116 inches first hole -
Thread Diameter
0.375 inches -
Grip Length
Between 2.178 inches and 2.198 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.391 inches first hole and 2.431 inches first hole -
Material
Steel comp 8630 -
Material Specification
Mil-s-6050 military specification single material response -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-011-1442 MPN 3E42189-101Aircraft Structural Panel
- 1560-00-015-2439 MPN 3W10027-104Under Wing F Panel
- 1560-00-022-0215 MPN 763869-95Conduit Tube
- 1560-00-072-7144 MPN 383965-3Panel Assembly
- 1560-00-073-7969 MPN 372163-3Aircraft Access Cover
- 1560-00-075-4605 MPN 786410-85Pitot Pre Tube Assy
- 4920-00-102-9048 MPN 4S90602-101ARigi Shaft Coupling
- 1560-00-150-1575 MPN 132359LTrack Fitting
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-122-0048 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
177095 | Lockheed Martin Corporation |