NSN 5306-00-123-0750
Coaxial Connector
Between 3.012 inches and 3.042 inches fastener length, dished hexagon head style, between 0.312 inches and 0.327 inches head height, width between flats: between 0.928 inches and 0.940 inches .
Manufacturer part number BACB30LC10-34D for national stock number 5306001230750.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-123-0750.
-
MPN or Model
BACB30LC10-34D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.877 inches and 0.927 inches -
Fastener Length
Between 3.012 inches and 3.042 inches -
Head Style
Dished hexagon -
Head Height
Between 0.312 inches and 0.327 inches -
Width Between Flats
Between 0.928 inches and 0.940 inches -
Grip Diameter
Between 0.6230 inches and 0.6240 inches -
Shank Unthreaded Hole Diameter
0.141 inches first hole and 0.151 inches first hole -
Thread Diameter
0.625 inches -
Grip Length
Between 2.115 inches and 2.135 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Criticality Code Justification
Test -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.753 inches first hole and 2.803 inches first hole -
Material
Steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-s-8503 military specification 3rd material response or mil-s-6098 military specification 4th material response or mil-s-6049 military specification 5th material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 3 federal specification all treatment responses -
Test Data Document
81349-mil-i-6868 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.). -
Thread Series Designator
Unf -
Specification Data
81205-bacb30lc manufacturers standard
More from these suppliers
- 5940-00-001-1496 MPN BACS13S175BNP&BACS13S275CNPGrounding Metallic Shielded Cable Ferrule
- 1560-00-045-9842 MPN 5-96311-63Aircraft Trim Tab
- 1560-00-110-3058 MPN 10-2455-31Aircraft Fuel Tank
- 5930-00-578-2694 MPN 10-2926-1Pressure Switch
- 1560-00-610-2649 MPN 29-8573-10Insulation Duct Clamp Assembly
- 1560-00-611-8960 MPN 50-2628-77Lower Fairing Seal Assembly
- 1560-00-614-2437 MPN 4-5573-1Wing Panel Assembly
- 1560-00-620-7592 MPN 25-6555Aircraft Access Cover
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-123-0750 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30LC10-34D | The Boeing Company |