NSN 5306-00-123-8965
Close Tolerance Hex Head Bolt
Between 2.335 inches and 2.382 inches fastener length, double hexagon head style, 0.187 inches head height, width between flats: between 0.492 inches and 0.502 inches .
Manufacturer part number ST3M561-5-32 for national stock number 5306001238965.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-123-8965.
-
MPN or Model
ST3M561-5-32
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093470 - Bolts/nuts I/s -
Unit Weight (Est.)
10 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.268 inches -
Fastener Length
Between 2.335 inches and 2.382 inches -
Head Style
Double hexagon -
Head Height
0.187 inches -
Width Between Flats
Between 0.492 inches and 0.502 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Thread Diameter
0.3125 inches -
Grip Length
2.000 inches -
Thready Qty Per Inch (tpi)
24 -
Material
Steel -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-035-5329 MPN HS2623-5Z-12Close Tolerance Screw
- 5305-00-842-7549 MPN HS2623-6Z11Close Tolerance Screw
- 5305-00-849-9796 MPN NAS1101-06-5Machine Screw
- 5305-00-941-6411 MPN NAS1134-5Close Tolerance Screw
- 5305-01-045-3021 MPN HT4016-3-4YShoulder Screw
- 5305-01-064-2340 MPN NAS1190-08P10BSocket Head Cap Screw
- 5305-01-104-1467 MPN HT4057-4-7AClose Tolerance Screw
- 5305-01-113-5865 MPN NAS1123E15Close Tolerance Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-123-8965 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
ST3M561-5-32 | Boeing Company, The |
BM17028-5-32A | Huck International, Inc. |
BM17028-5-32A | Huck Intl Inc |