NSN 5306-00-124-9783
Wheel Bolt
Between 5.390 inches and 5.437 inches fastener length, hexagon head style, between 0.390 inches and 0.422 inches head height, width between flats: between 1.053 inches and 1.066 inches .
Manufacturer part number AN12C52 for national stock number 5306001249783.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-124-9783.
-
MPN or Model
AN12C52
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 1.062 inches and 1.141 inches -
Fastener Length
Between 5.390 inches and 5.437 inches -
Head Style
Hexagon -
Head Height
Between 0.390 inches and 0.422 inches -
Width Between Flats
Between 1.053 inches and 1.066 inches -
Shank Unthreaded Hole Diameter
0.141 inches first hole and 0.151 inches first hole -
Thread Diameter
0.750 inches -
Grip Length
Between 4.296 inches and 4.328 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
16 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
5.171 inches first hole and 5.203 inches first hole -
Material
Steel comp 431 -
Material Specification
Mil-s-18732 military specification single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-204-7613 MPN AN3102E14S2PElectrical Receptacle Connector
- 5935-00-259-7431 MPN AN3106A28-6SElectrical Plug Connector
- 4820-00-509-4696 MPN AN6295-1Fluid Pressure Regulating Valve
- 5935-00-523-9150 MPN AN3101A14S2PElectrical Plug Connector
- 5935-00-539-2373 MPN AN3102A36-14SCElectrical Receptacle Connector
- 4820-00-529-3640 MPN AN6280-12Check Valve
- 5935-00-222-7812 MPN AN3106A28-16PElectrical Plug Connector
- 5935-00-189-1504 MPN AN3101A14S1PElectrical Plug Connector
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-124-9783 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN12C52 | Aeronautical Standards Group |