NSN 5306-00-133-2359
Wheel Bolt
Between 0.428 inches and 0.448 inches fastener length, hexagon head style, between 0.146 inches and 0.166 inches head height, width between flats: between 0.367 inches and 0.376 inches .
Manufacturer part number R543P04U for national stock number 5306001332359.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-133-2359.
-
MPN or Model
R543P04U
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.366 inches and 0.448 inches -
Fastener Length
Between 0.428 inches and 0.448 inches -
Head Style
Hexagon -
Head Height
Between 0.146 inches and 0.166 inches -
Width Between Flats
Between 0.367 inches and 0.376 inches -
Thread Diameter
0.190 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
32 -
Surface Finish
63.0 microinches bearing surface of head -
Material
Iron alloy 660 -
Material Specification
Ams 5735 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-502-4906 MPN 21C1532-068Electrical Connector Backshell
- 4920-00-574-1496 MPN 21C3620G001Aircraft Maintenance Fixture
- 4920-00-698-7094 MPN 1C2601-8Aircraft Engine Maintenance Fixture
- 4920-01-003-4617 MPN 518D540P60Angle Guard
- 4920-01-004-3138 MPN 21C3776P01Aircraft Maintenance Alignment Jig
- 4920-01-111-5124 MPN 1C6868G01Drive Rotor Fixture
- 5905-01-146-2869 MPN J165P1181AInductive Wire Wound Fixed Resistor
- 4920-01-187-9199 MPN 21C8151G03Special Bearing Puller
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-133-2359 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
R543P04U | General Electric Company |