NSN 5306-00-135-9749
Wheel Bolt
0.312 inches fastener length, double hexagon w/hole head style, 0.260 inches head height, width between flats: between 0.243 inches and 0.251 inches .
Manufacturer part number 2-161-164-01 for national stock number 5306001359749.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-135-9749.
-
MPN or Model
2-161-164-01
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.220 inches and 0.240 inches -
Fastener Length
0.312 inches -
Head Style
Double hexagon w/hole -
Head Height
0.260 inches -
Width Between Flats
Between 0.243 inches and 0.251 inches -
Extended Washer Diameter
0.375 inches -
Extended Washer Thickness
Between 0.040 inches and 0.050 inches -
Hole Diameter
0.047 inches -
Thread Diameter
0.190 inches -
Grip Length
Between 0.072 inches and 0.092 inches -
Hole Quantity
4 -
Hole Type
Drilled -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
130000 pounds per square inch -
Hardness Rating
248.0 brinell standard and 341.0 brinell standard -
Minimum Yield Strength
85000 pounds per square inch -
Hole Configuration Style
Double hexagon longitudinal hole -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams 5731 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 4820-00-406-3859 MPN 968390-1Check Valve
- 5950-00-581-8247 MPN 45012-3Power Transformer
- 5930-00-583-1832 MPN 104-516-9001Switch Actuator Adapter
- 4920-00-717-7020 MPN 281162-1Shaft Holder
- 4920-00-759-3411 MPN 253035-33Interface Device Adapter Assembly
- 4920-00-848-4953 MPN LTCT8697-01Ring Assembly
- 4920-01-037-5112 MPN 293674-1Aircraft Maintenance Fixture
- 4820-01-175-7788 MPN LTCT23682Special Shaped Actuator Valve Diaphragm
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-135-9749 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
2-161-164-01 | Honeywell International Inc. |