NSN 5306-00-136-1487
Coaxial Connector
Between 4.735 inches and 4.765 inches fastener length, hexagon head style, 0.125 inches head height, width between flats: 0.439 inches .
Manufacturer part number TK916-4-60H for national stock number 5306001361487.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-136-1487.
-
MPN or Model
TK916-4-60H
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.3 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.985 inches and 1.015 inches -
Fastener Length
Between 4.735 inches and 4.765 inches -
Head Style
Hexagon -
Head Height
0.125 inches -
Width Between Flats
0.439 inches -
Hole Diameter
0.046 inches -
Locking Feature
Strip threads -
Grip Diameter
0.2490 inches -
Thread Diameter
0.250 inches -
Grip Length
3.750 inches -
Hole Quantity
1 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hole Configuration Style
Hexagon flats -
Material
Steel comp e4340 or steel comp 8740 -
Material Specification
Mil-s-5000 military specification 1st material response or mil-s-6049 military specification 2nd material response -
Surface Treatment
Nickel and cadmium -
Surface Treatment Specification
Ams 2416 assn standard all treatment responses -
Thread Series Designator
Unf
More from these suppliers
- 5305-00-557-9613 MPN DHF7900-10A5Screw
- 5305-00-917-6057 MPN NAS1101-04-8Machine Screw
- 5305-01-025-1345 MPN NAS1101E06-8Machine Screw
- 5305-01-050-9784 MPN DFHT79-10B5Panel Screw Assembly
- 5305-01-054-2536 MPN BACB30LK3-11Close Tolerance Screw
- 5305-01-072-4707 MPN HT4024L3-1Close Tolerance Screw
- 5305-01-135-1153 MPN H148-5-24Close Tolerance Screw
- 5305-01-139-2035 MPN NAS1189E3T8LKSocket Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-136-1487 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
TK916-4-60H | Huck International, Inc. |
TK916-4-60H | Huck Intl Inc |