NSN 5306-00-136-2750
Wheel Bolt
1.062 inches fastener length, hexagon head style, between 0.182 inches and 0.198 inches head height, width between flats: between 0.492 inches and 0.502 inches .
Manufacturer part number MS9502-13 for national stock number 5306001362750.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-136-2750.
-
MPN or Model
MS9502-13
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.2 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.874 inches and 0.934 inches -
Fastener Length
1.062 inches -
Head Style
Hexagon -
Head Height
Between 0.182 inches and 0.198 inches -
Width Between Flats
Between 0.492 inches and 0.502 inches -
Hole Diameter
0.065 inches -
Thread Diameter
0.312 inches -
Grip Length
Between 0.128 inches and 0.188 inches -
Hole Quantity
1 -
Hole Type
Drilled -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
130000 pounds per square inch -
Hardness Rating
248.0 brinell standard and 341.0 brinell standard -
Minimum Yield Strength
85000 pounds per square inch -
Hole Configuration Style
Hexagon flats -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams 5731 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5905-00-006-5494 MPN RLR20C622GRFilm Fixed Resistor
- 5935-00-014-6522 MPN MS3111F14-12PElectrical Plug Connector
- 5935-00-028-0279 MPN MS27497E22A55SCElectrical Receptacle Connector
- 5940-00-052-7787 MPN MS17122-16Stud Terminal
- 5950-00-059-3903 MPN MS75008-22Radio Frequency Coil
- 5935-00-061-2475 MPN MS3108R24-5SElectrical Plug Connector
- 5905-00-104-8342 MPN MS35043-102Composition Fixed Resistor
- 5940-00-113-3147 MPN MS20659-127Lug Terminal
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-136-2750 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS9502-13 | Military Standards |