NSN 5306-00-138-6385
Close Tolerance Hex Head Bolt
W/retaining element on shank.
Manufacturer part number 106467-4-09 for national stock number 5306001386385.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-138-6385.
-
MPN or Model
106467-4-09
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.283 inches and 0.334 inches -
Fastener Length
Between 0.981 inches and 1.001 inches -
Head Style
Dished hexagon -
Head Height
Between 0.126 inches and 0.141 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Grip Diameter
Between 0.2483 inches and 0.2492 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Thread Diameter
0.250 inches -
Grip Length
Between 0.562 inches and 0.578 inches -
Thready Qty Per Inch (tpi)
28 -
Hardness Rating
36.0 rockwell c and 41.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.881 inches first hole and 0.911 inches first hole -
Surface Finish
63.0 microinches grip -
Material
Steel -
Material Specification
-1l-b-83050 military specification single material response -
Surface Treatment
Cadmium and chromate -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-100-6838 MPN CA11020-06-3-7PScrew Assembly
- 5305-00-151-8676 MPN CA4740-04-9Socket Head Cap Screw
- 5305-01-054-7958 MPN CA28102-06-6PPanel Screw Assembly
- 5305-01-289-5010 MPN CA28080-4-12HSPanel Screw Assembly
- 5305-01-601-7772 MPN HT4032V4-5Close Tolerance Screw
- 5940-01-010-1572 MPN NAS1745-16Conductor Splice
- 5940-01-425-6512 MPN NAS1063A5-445Terminal Board Marker Strip
- 1680-01-478-1737 MPN NAS43DD0-38FCAircr Sleeve Spacer
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-138-6385 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
106467-4-09 | Sps Technologies, Llc |
AS194-4-09 | Avibank Mfg., Inc. |
MS27576-4-09 | National Aerospace Standards |
MS27576-4-09 | Military Standards |
CA4510-4-09 | Arconic Global Fasteners & Rings, |