NSN 5306-00-140-4640
Coaxial Connector
Between 11.722 inches and 11.752 inches fastener length, dished hexagon head style, between 0.125 inches and 0.140 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number VS2667-4P181D for national stock number 5306001404640.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-140-4640.
-
MPN or Model
VS2667-4P181D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.425 inches -
Fastener Length
Between 11.722 inches and 11.752 inches -
Head Style
Dished hexagon -
Head Height
Between 0.125 inches and 0.140 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Thread Diameter
0.250 inches -
Grip Length
Between 11.302 inches and 11.322 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
11.534 inches first hole and 11.584 inches first hole -
Material
Iron alloy 660 -
Material Specification
Ams 5732 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Mil-s-5002 military specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1680-01-501-4903 MPN VS3258C4G3-4Headle Shoulder Pin
- 5305-01-194-0653 MPN SC1779-4-5Close Tolerance Screw
- 5305-01-198-8122 MPN SC217-08-7Machine Screw
- 5305-01-217-9056 MPN HT4059V4-4ASShoulder Screw
- 5305-01-230-3369 MPN HT4075V4-10-36Close Tolerance Screw
- 5305-01-300-1505 MPN HT4075D5-12-24Close Tolerance Screw
- 5305-01-308-0170 MPN HT8137-3-4ASMClose Tolerance Screw
- 5305-01-365-5794 MPN SC5063-3-11Close Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-140-4640 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
VS2667-4P181D | Arconic Global Fasteners & Rings, |
VS2667-4P181D | Alcoa Global Fasteners, Inc. |
VS2667-4P18D | Alcoa Global Fasteners, Inc. |