NSN 5306-00-141-4775
Coaxial Connector
Between 1.327 inches and 1.374 inches fastener length, hexagon head style, 0.125 inches head height, width between flats: 0.438 inches .
Manufacturer part number NAS464-4A16 for national stock number 5306001414775.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-141-4775.
-
MPN or Model
NAS464-4A16
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.327 inches and 0.374 inches -
Fastener Length
Between 1.327 inches and 1.374 inches -
Head Style
Hexagon -
Head Height
0.125 inches -
Width Between Flats
0.438 inches -
Grip Diameter
Between 0.2487 inches and 0.2492 inches -
Single Shear Strength
4650 pounds per square inch -
Thread Diameter
0.250 inches -
Grip Length
1.000 inches -
Thready Qty Per Inch (tpi)
28 -
Material
Steel -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-152-7883 MPN NAS1190E06P7LElectrical Connector Shell
- 5305-00-054-9247 MPN MS24694C108Machine Screw
- 5305-00-059-3086 MPN MS24694-S103Machine Screw
- 5305-00-059-3662 MPN NAS1635-3-14Machine Screw
- 5305-00-069-5600 MPN MS51958-34Machine Screw
- 5305-00-071-2222 MPN MS35199-54Machine Screw
- 5305-00-071-6614 MPN NAS1191E4P7LSocket Head Cap Screw
- 5305-00-104-5075 MPN NAS1352-5LE52PSocket Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-141-4775 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS464-4A16 | National Aerospace Standards |