NSN 5306-00-141-5179
Shouldered Rivet Ring Bolt
About this product
Between 0.250 inches and 0.253 inches eye inside diameter, 0.094 inches shoulder thickness, between 1.953 inches and 2.000 inches shank length, eye stock thickness: 0.188 inches .
Manufacturer part number AN44-17 for national stock number 5306001415179.
Datasheet
-
Product description
Eye Bolt NSN 5306-00-141-5179.
-
MPN or Model
AN44-17
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.531 inches -
Eye Inside Diameter
Between 0.250 inches and 0.253 inches -
Shoulder Thickness
0.094 inches -
Shank Length
Between 1.953 inches and 2.000 inches -
Eye Stock Thickness
0.188 inches -
Shoulder Diameter
0.625 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole -
Overall Length
2.859 inches -
Thread Diameter
0.312 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Distance From Center Of Eye To Shank End
2.500 inches -
Distance From Threaded End To Shank Hole Center
1.797 inches first hole -
Eye Outside Width
0.625 inches -
Material
Steel comp 4140 or steel comp 8740 or steel comp 8630 or steel comp 8735 or steel comp 4130 or steel comp 4037 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-6049 military specification 2nd material response or mil-s-6050 military specification 3rd material response or mil-s-6098 military specification 4th material response or mil-s-6758 military specification 5th material response or mil-s-8695 military specification 6th material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 1680-01-417-3471 MPN NAS1103-34DWBolt Aircraft Hinge
- 5940-01-425-6042 MPN NAS1063A5-437Terminal Board Marker Strip
- 5940-01-451-4414 MPN NAS1063A20-500BBTerminal Board Marker Strip
- 5940-01-437-8563 MPN NAS1063A2-107CXTerminal Board Marker Strip
- 5935-01-322-4929 MPN NAS820-32AElectrical Connector Cover
- 5305-00-051-7371 MPN NAS560XK4-9Machine Screw
- 5305-00-052-3537 MPN MS35202-46Machine Screw
- 5305-00-052-6910 MPN MS24629-14Tapping Screw
Eye Bolt
An externally threaded device whose threaded portion is of one nominal diameter, without a head, but with the unthreaded end either bent more than 225 degrees (3.925 radians) or cast, forged, or punched to resemble an eye. See also bolt, hook. Excludes connector, rod end.
Pricing and Availability
Get a quote for 5306-00-141-5179 eye boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN44-17 | National Aerospace Standards |
AN44-17 | Aeronautical Standards Group |
Stock Check
Availability of this NSN has not been updated recently. Submit
the pricing and availbility form above to receive an up to date quote.