NSN 5306-00-142-4240
Coaxial Connector
Between 6.513 inches and 6.543 inches fastener length, dished hexagon head style, between 0.281 inches and 0.296 inches head height, width between flats: between 0.865 inches and 0.877 inches .
Manufacturer part number BACB30LC9-91D for national stock number 5306001424240.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-142-4240.
-
MPN or Model
BACB30LC9-91D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.815 inches and 0.865 inches -
Fastener Length
Between 6.513 inches and 6.543 inches -
Head Style
Dished hexagon -
Head Height
Between 0.281 inches and 0.296 inches -
Width Between Flats
Between 0.865 inches and 0.877 inches -
Grip Diameter
Between 0.5605 inches and 0.5615 inches -
Shank Unthreaded Hole Diameter
0.141 inches first hole and 0.151 inches first hole -
Thread Diameter
0.562 inches -
Grip Length
Between 5.678 inches and 5.698 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Criticality Code Justification
Test -
Distance From Head Largest Bearing Surface To Shank Hole Center
6.285 inches first hole and 6.335 inches first hole -
Material
Steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-s-8503 military specification 3rd material response or mil-s-6098 military specification 4th material response or mil-s-6049 military specification 5th material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 3 federal specification single treatment response -
Test Data Document
81349-mil-i-6868 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.). -
Thread Series Designator
Unf -
Specification Data
81205-bacb30lc manufacturers standard
More from these suppliers
- 1560-00-090-0999 MPN 9-40196Rudder Trim Handwheel
- 1560-00-586-9166 MPN 39-7684-1Side Pin Latch Nacelle Fitting
- 1560-00-605-1894 MPN 65-5579Turbine Exhaust Housing
- 1560-00-641-3749 MPN 9-60369-2001Airfoil Rib
- 1560-00-670-0467 MPN 39-5112-501Aircraft Access Cover
- 1560-00-704-8073 MPN 6-84395-3Position Switch Linkage
- 1560-00-794-8585 MPN 65-33326-2Aircraft Structural Component Support
- 1560-00-805-8554 MPN 39-9922-2Cowling Door Hinge
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-142-4240 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30LC9-91D | The Boeing Company |