NSN 5306-00-142-5057
Coaxial Connector
Between 0.802 inches and 0.822 inches fastener length, double hexagon w/hole head style, between 0.320 inches and 0.340 inches head height, width between flats: between 0.304 inches and 0.313 inches .
Manufacturer part number 3011T71P01 for national stock number 5306001425057.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-142-5057.
-
MPN or Model
3011T71P01
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.479 inches and 0.519 inches -
Fastener Length
Between 0.802 inches and 0.822 inches -
Head Style
Double hexagon w/hole -
Head Height
Between 0.320 inches and 0.340 inches -
Width Between Flats
Between 0.304 inches and 0.313 inches -
Extended Washer Diameter
Between 0.428 inches and 0.448 inches -
Extended Washer Thickness
Between 0.060 inches and 0.070 inches -
Grip Diameter
Between 0.2490 inches and 0.2493 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 0.303 inches and 0.323 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
32.0 rockwell c and 32.0 rockwell c -
Material
Stainless steel -
Thread Series Designator
Unjf
More from these suppliers
- 4820-00-915-7853 MPN 37C302282P102Check Valve
- 4820-01-020-7977 MPN 4027T69P05Pressurizing Oil Tank Valve
- 5306-01-453-1584 MPN R1453P005SLMachine Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-142-5057 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
3011T71P01 | General Electric Company |