NSN 5306-00-143-2030
Wheel Bolt
Between 0.940 inches and 0.960 inches fastener length, hexagon head style, between 0.160 inches and 0.180 inches head height, width between flats: between 0.492 inches and 0.502 inches .
Manufacturer part number 9608M36P02 for national stock number 5306001432030.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-143-2030.
-
MPN or Model
9608M36P02
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.550 inches and 0.590 inches -
Fastener Length
Between 0.940 inches and 0.960 inches -
Head Style
Hexagon -
Head Height
Between 0.160 inches and 0.180 inches -
Width Between Flats
Between 0.492 inches and 0.502 inches -
Thread Diameter
0.312 inches -
Grip Length
Between 0.370 inches and 0.390 inches -
Thready Qty Per Inch (tpi)
24 -
Surface Finish
63.0 microinches bearing surface of head -
Material
Steel -
Thread Series Designator
Unf
More from these suppliers
- 4920-00-073-2954 MPN 1C3582G1Thr Calibration Kit
- 4920-00-204-4466 MPN 21C5511G01Test Cowl Assembly
- 1560-00-221-7184 MPN 9641M75G06Thrust Blocker Link
- 4920-00-575-7238 MPN 21C3629G001Check Valve And Holding Fixture
- 4920-00-765-1459 MPN 21C752Bearing Protector
- 5905-00-792-5966 MPN R999P0720AInductive Wire Wound Fixed Resistor
- 5905-00-792-7369 MPN R999P1170AInductive Wire Wound Fixed Resistor
- 5905-00-904-5666 MPN R984P2601BInductive Wire Wound Fixed Resistor
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-143-2030 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
9608M36P02 | General Electric Company |