NSN 5306-00-143-2287
Wheel Bolt
1.000 inches fastener length, hexagon head style, between 0.378 inches and 0.403 inches head height, width between flats: between 0.922 inches and 0.938 inches .
Manufacturer part number 2533401PC115 for national stock number 5306001432287.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-143-2287.
-
MPN or Model
2533401PC115
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 0.889 inches and 1.000 inches -
Fastener Length
1.000 inches -
Head Style
Hexagon -
Head Height
Between 0.378 inches and 0.403 inches -
Width Between Flats
Between 0.922 inches and 0.938 inches -
Thread Diameter
0.625 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
120000 pounds per square inch -
Hardness Rating
23.0 rockwell c and 32.0 rockwell c -
Material
Steel comp 1015 or steel comp 1016 or steel comp 1017 or steel comp 1018 -
Surface Treatment
Zinc -
Surface Treatment Specification
Qq-z-325, type 2, cl 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-028-3613 MPN 394866-2Electrical Connector Cable Clamp
- 5930-00-062-5032 MPN 2076555Pressure Switch
- 5905-00-070-8176 MPN 2303880PC3Inductive Wire Wound Fixed Resistor
- 5985-00-073-0725 MPN 2269758Waveguide Adapter
- 5945-00-075-5665 MPN 2489624Electrical Solenoid
- 4820-00-113-8276 MPN 64A98B575-1Safety Relief Valve
- 5905-00-156-5804 MPN 298484PC479Inductive Wire Wound Fixed Resistor
- 5905-00-192-0649 MPN 625463PC80Composition Fixed Resistor
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-143-2287 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
2533401PC115 | Navair And Navsea Managed |