NSN 5306-00-143-2297
Wheel Bolt
Altered finish.
Manufacturer part number STD3053-3 for national stock number 5306001432297.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-143-2297.
-
MPN or Model
STD3053-3
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.438 inches and 0.500 inches -
Fastener Length
0.500 inches -
Head Style
Hexagon -
Head Height
0.125 inches -
Width Between Flats
Between 0.367 inches and 0.376 inches -
Thread Diameter
0.190 inches -
Grip Length
Between 0.186 inches and 0.189 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
32 -
Surface Finish
63.0 microinches grip -
Material
Steel comp 8740 -
Material Specification
Ams 6322 assn standard single material response -
Thread Series Designator
Unf
More from these suppliers
- 5305-01-013-9598 MPN ST3M562-7D19Close Tolerance Screw
- 5935-00-103-5081 MPN 223-528-9101Electrical Receptacle Connector
- 5905-00-458-7520 MPN 621-003-9008Wire Wound Fixed Resistor
- 5935-00-814-5203 MPN 223-501Electrical Receptacle Connector
- 5935-00-879-8441 MPN 659-501-9007Electrical Connector Backshell
- 5945-00-881-9975 MPN PS310678-8Electrical Solenoid
- 4920-00-886-1286 MPN LTCT421Aircraft Engine Test Stand
- 4920-00-886-1291 MPN LTCT529Outer Bellmouth
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-143-2297 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
STD3053-3 | Honeywell International Inc. |
STD3053-3 | M&m Aerospace Hardware Inc. |