NSN 5306-00-143-2574
Wheel Bolt
4.260 inches fastener length, hexagon head style, 0.250 inches head height, width between flats: between 0.928 inches and 0.940 inches .
Manufacturer part number 4J13360-113A for national stock number 5306001432574.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-143-2574.
-
MPN or Model
4J13360-113A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.529 inches -
Fastener Length
4.260 inches -
Head Style
Hexagon -
Head Height
0.250 inches -
Width Between Flats
Between 0.928 inches and 0.940 inches -
Shank Unthreaded Hole Diameter
0.139 inches first hole and 0.145 inches first hole -
Thread Diameter
0.625 inches -
Grip Length
3.620 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
280000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
4.130 inches first hole -
Surface Finish
32.0 microinches grip -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-022-9444 MPN 348626-5ROuter Wi Stiffener
- 1560-00-065-9933 MPN 389566-3Urinal Drain Joint Insulation
- 1560-00-079-0362 MPN 361121-15Inboard Nacelle Fairing
- 1560-00-081-7065 MPN 4P33141-101ACable Conduit Fireseal
- 1560-00-119-6841 MPN EEP692-113Center Foil Assembly
- 1680-00-140-0629 MPN 792871-3Seat Support
- 1560-00-179-0482 MPN 4F23684-102CIdler Arm Support Bracket
- 1560-00-184-6334 MPN 3W24409-111Leading Edge Panel
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
![Mechanic Bill explains Wheel Bolt](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5306-00-143-2574 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
4J13360-113A | Lockheed Martin Corporation |
Stock Check
![](/public/images/partscage_shelf3.png)
- NS: 106
- NE: 40