NSN 5306-00-143-3067
Coaxial Connector
Between 3.305 inches and 3.335 inches fastener length, hexagon head style, 0.620 inches head height, width between flats: between 1.973 inches and 2.008 inches .
Manufacturer part number 3-99473-2-1 for national stock number 5306001433067.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-143-3067.
-
MPN or Model
3-99473-2-1
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
4 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 2.135 inches and 2.165 inches -
Fastener Length
Between 3.305 inches and 3.335 inches -
Head Style
Hexagon -
Head Height
0.620 inches -
Width Between Flats
Between 1.973 inches and 2.008 inches -
Grip Diameter
Between 1.3890 inches and 1.3904 inches -
Thread Diameter
1.375 inches -
Grip Length
1.170 inches -
Thready Qty Per Inch (tpi)
12 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Material
Steel comp e4340 or steel comp 8740 -
Material Specification
Mil-s-5000 military specification 1st material response or mil-s-6049 military specification 2nd material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
F-1.1915 fscm 81205 mfr ref single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5975-00-353-5589 MPN STBT42K05725AElectronic Junction Rack
- 1560-00-547-2075 MPN 6-83582Emergency Pin Assembly
- 1560-00-564-4781 MPN 10-2455-5Aircraft Fuel Cell
- 1560-00-631-6185 MPN 5-86559-165Gap Wing Cover
- 1560-00-646-7233 MPN 65-7360-19Aircraft Skin
- 1560-00-646-9544 MPN 65-17640-104Aircraft Skin
- 1680-00-685-5897 MPN 10-2565-4Aircraft Seat
- 1560-00-704-8074 MPN 6-84395-2Position Switch Linkage
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-143-3067 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
3-99473-2-1 | The Boeing Company |