NSN 5306-00-143-3351
Coaxial Connector
Between 0.940 inches and 0.960 inches fastener length, double hexagon w/hole head style, between 0.365 inches and 0.385 inches head height, width between flats: between 0.367 inches and 0.376 inches .
Manufacturer part number 9610M82P03 for national stock number 5306001433351.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-143-3351.
-
MPN or Model
9610M82P03
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
013280 - Alum Bolts -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.650 inches and 0.680 inches -
Fastener Length
Between 0.940 inches and 0.960 inches -
Head Style
Double hexagon w/hole -
Head Height
Between 0.365 inches and 0.385 inches -
Width Between Flats
Between 0.367 inches and 0.376 inches -
Extended Washer Diameter
Between 0.490 inches and 0.510 inches -
Extended Washer Thickness
Between 0.070 inches and 0.080 inches -
Grip Diameter
Between 0.3276 inches and 0.3278 inches -
Thread Diameter
0.312 inches -
Grip Length
Between 0.280 inches and 0.290 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
36.0 rockwell c -
Material
Nickel alloy 718 -
Material Specification
Inconel fscm 74900 mfr ref single material response -
Thread Series Designator
Unjf
More from these suppliers
- 4920-00-226-0422 MPN 1C6329G01Aircraft Engine Maintenance Fixture
- 4920-00-270-7005 MPN 21C5542G01Ignition Test Set
- 4920-00-411-5418 MPN 9413M74G01Trim Clamp Assembly
- 4820-00-600-5771 MPN 308D446P1Check Valve
- 4820-00-735-8446 MPN 512D842P1Fluid Pressure Regulating Valve
- 5935-00-754-5480 MPN 21C1539-201Electrical Connector Cover
- 4920-00-831-6808 MPN 1C5626G01Aircraft Engine Maintenance Fixture
- 4920-00-910-2349 MPN 1C3542G9Po Engine Test Cell
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-143-3351 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
9610M82P03 | General Electric Company |
9610M82P03 | M.s. Aerospace Inc. |
Stock Check
- NS: 1
- NE: 30