NSN 5306-00-143-3366
Eccentric Head Screw
About this product
2.720 inches fastener length, 0.106 inches first hole shank unthreaded hole diameter, 2.520 inches first hole distance from head largest bearing surface to shank hole center, part name assigned by controlling agency: navy special project.
Manufacturer part number CV21-493501-2 for national stock number 5306001433366.
Datasheet
-
Product description
Eccentric Head Bolt NSN 5306-00-143-3366.
-
MPN or Model
CV21-493501-2
-
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Fastener Length
2.720 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.520 inches first hole -
Part Name Assigned By Controlling Agency
Navy special project
More from these suppliers
- 5935-00-318-2790 MPN CVC2637-24P2Electrical Connector Backshell
- 1680-00-587-3120 MPN CV15-158597-2Bell Crank
- 1560-00-631-4695 MPN CV15-300055-59Shroud Assy
- 5905-00-681-5213 MPN CVE150242-2Precision Wire Wound Variable Resistor
- 5935-00-878-1740 MPN CVC5892R104S6AElectrical Receptacle Connector
- 1560-00-995-5601 MPN 26-730503-7Droop Support Assy
- 1560-01-132-7811 MPN CV15-564575-12Aircraft Structural Plate
- 1560-01-245-7154 MPN 218-20150-81Lip Fairing
Eccentric Head Bolt
An externally threaded fastener the head of which is usually flat with a periphery not concentric to the bolt shank. The head is not designed for wrenching. It may have a drive feature located at the threaded end, which can be used to rotate the screw and eccentric head into a locking position to secure a flanged or groove component.
Pricing and Availability
Get a quote for 5306-00-143-3366 eccentric head boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
CV21-493501-2 | Triumph Aerostructures, Llc |
CV21-493501-2 | Triumph Aerostructures, Llc |
Stock Check
Availability of this NSN has not been updated recently. Submit
the pricing and availbility form above to receive an up to date quote.