NSN 5306-00-143-3399
Shouldered Rivet Ring Bolt
About this product
Between 0.375 inches and 0.378 inches eye inside diameter, 0.094 inches shoulder thickness, between 1.062 inches and 1.109 inches shank length, eye stock thickness: between 0.183 inches and 0.193 inches .
Manufacturer part number AN46-10A for national stock number 5306001433399.
Datasheet
-
Product description
Eye Bolt NSN 5306-00-143-3399.
-
MPN or Model
AN46-10A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.624 inches and 0.671 inches -
Eye Inside Diameter
Between 0.375 inches and 0.378 inches -
Shoulder Thickness
0.094 inches -
Shank Length
Between 1.062 inches and 1.109 inches -
Eye Stock Thickness
Between 0.183 inches and 0.193 inches -
Shoulder Diameter
0.750 inches -
Overall Length
Between 2.078 inches and 2.125 inches -
Thread Diameter
0.375 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Distance From Center Of Eye To Shank End
1.710 inches -
Eye Outside Width
0.750 inches -
Material
Steel comp 4037 or steel comp 4130 or steel comp 8630 or steel comp 8735 or steel comp 8740 or steel comp 4140 -
Material Specification
Mil-b-6812 military specification all material responses -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 3 federal specification single treatment response -
Style Designator
Round, closed w/shoulder -
Thread Series Designator
Unf
More from these suppliers
- 5940-01-449-7674 MPN NAS1063A12-N1000Terminal Board Marker Strip
- 5940-01-510-2081 MPN NAS1063A7Terminal Board Marker Strip
- 5940-01-451-4407 MPN NAS1063A10-105BVTerminal Board Marker Strip
- 5940-01-451-4407 MPN NAS1063A10-105BVTerminal Board Marker Strip
- 5305-00-009-0517 MPN NAS1393C00-7Machine Screw
- 5305-00-058-2898 MPN NAS1142E2Close Tolerance Screw
- 5305-00-180-0003 MPN MILS7839Machine Screw
- 5305-00-225-7775 MPN MS16996-25Socket Head Cap Screw
Eye Bolt
An externally threaded device whose threaded portion is of one nominal diameter, without a head, but with the unthreaded end either bent more than 225 degrees (3.925 radians) or cast, forged, or punched to resemble an eye. See also bolt, hook. Excludes connector, rod end.
Pricing and Availability
Get a quote for 5306-00-143-3399 eye boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN46-10A | National Aerospace Standards |
AN46-10A | Aeronautical Standards Group |
Stock Check
Availability for this item was last checked on 03/19/24.
The quantities and conditions available at the time were:
- NS: 32
- NE: 1