NSN 5306-00-144-0393
Coaxial Connector
Roll threads.
Manufacturer part number 10930585 for national stock number 5306001440393.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-144-0393.
-
MPN or Model
10930585
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.935 inches and 1.060 inches -
Fastener Length
Between 1.375 inches and 1.406 inches -
Head Style
Double hexagon w/hole -
Head Height
0.405 inches -
Width Between Flats
Between 0.492 inches and 0.502 inches -
Extended Washer Diameter
Between 0.715 inches and 0.725 inches -
Extended Washer Thickness
0.075 inches -
Locking Feature
Strip threads -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Thread Diameter
0.375 inches -
Grip Length
0.346 inches -
Thready Qty Per Inch (tpi)
16 -
Min. Tensile Strength (psi)
260000 pounds per square inch -
Hardness Rating
51.0 rockwell c and 53.0 rockwell c -
Minimum Yield Strength
215000 pounds per square inch -
Surface Finish
32.0 microinches grip -
Material
Steel comp h11 fastener -
Material Specification
Mil-f-18240 military specification single material response locking feature -
Surface Treatment
Cadmium fastener -
Surface Treatment Specification
Mil-c-8837, type 1, class 2 military specification single treatment response fastener -
Thread Series Designator
Unjc
More from these suppliers
- 5935-00-534-2171 MPN 5342171Recepta
- 4820-00-842-5519 MPN 8356327Plug Valve
- 5975-00-880-7644 MPN 8019831Electrical Box Connector
- 5930-01-017-1643 MPN CPR102237Pressure Switch
- 5940-01-088-6840 MPN 11668338Quick Disconnect Terminal
- 5940-01-139-9663 MPN 12311594Elec Terminal Block
- 4820-01-183-8479 MPN 12333372-1Calibrated Flow Valve
- 4820-01-345-8889 MPN 12344839Hydraulic System Bleeder Valve
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-144-0393 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
10930585 | U S Army Tank Automotive Command |