NSN 5306-00-144-6546
Coaxial Connector
6.220 inches fastener length, hexagon head style, 0.207 inches head height, width between flats: 0.750 inches .
Manufacturer part number A51G10619-11 for national stock number 5306001446546.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-144-6546.
-
MPN or Model
A51G10619-11
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.3 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.500 inches -
Fastener Length
6.220 inches -
Head Style
Hexagon -
Head Height
0.207 inches -
Width Between Flats
0.750 inches -
Grip Diameter
Between 0.4350 inches and 0.4356 inches -
Shank Unthreaded Hole Diameter
0.105 inches first hole and 0.110 inches first hole -
Thread Diameter
0.438 inches -
Grip Length
5.720 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
280000 pounds per square inch -
Hardness Rating
53.0 rockwell c and 55.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
6.020 inches first hole -
Material
Steel -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Mil-c-8837 type 2 cl 1 federal specification all treatment responses -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-003-9081 MPN 128EC60048-1Aircraft Thermal Insulation Pipe Covering
- 1560-00-025-5023 MPN 92433Exhaust Shroud Drai Pan Assembly
- 5930-00-027-4010 MPN GS839DK3ASensitive Switch
- 1560-00-037-1458 MPN 89PM1460-1Engine Cont Power Plant Terminal
- 1560-00-075-8242 MPN 128WP10035-1Hi Fairing Assembly
- 5930-00-091-1093 MPN 123SCEC5108-5Thermostatic Switch
- 5985-00-138-6022 MPN 1128SCAV780-1Variable Attenuator
- 1560-00-148-7218 MPN A51B20172-5Seal-fairing Assembly
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-144-6546 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
A51G10619-11 | Northrop Grumman Systems Corporation |
A51G10619-11 | Northrop Grumman Systems Corporation |