NSN 5306-00-145-0710
Wheel Bolt
Between 0.615 inches and 0.635 inches fastener length, hexagon head style, between 0.146 inches and 0.166 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number R543P07U for national stock number 5306001450710.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-145-0710.
-
MPN or Model
R543P07U
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
20 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.553 inches and 0.635 inches -
Fastener Length
Between 0.615 inches and 0.635 inches -
Head Style
Hexagon -
Head Height
Between 0.146 inches and 0.166 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Thread Diameter
0.190 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
32 -
Surface Finish
32.0 microinches bearing surface of head -
Material
Iron alloy 660 -
Material Specification
Ams 5735 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5905-00-126-5925 MPN R984P4761AInductive Wire Wound Fixed Resistor
- 4920-00-450-1847 MPN 21C1546-378Transo Support Assy
- 4920-00-570-8735 MPN 5793105-20G1Special Cable Assy
- 4920-00-775-4801 MPN 1C2813G2Main Fue Test Stand
- 4920-00-924-5824 MPN 21C1512P010Temperature Rake
- 4920-01-088-4587 MPN 21C8170G01Seal Puller
- 4920-01-150-0655 MPN 3C3221G01Aircraft Maintenance Fixture
- 4920-01-164-9537 MPN 21C8839G01Holding Test Tube Fixture
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-145-0710 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
R543P07U | General Electric Company |