NSN 5306-00-146-2129
Wheel Bolt
0.400 inches fastener length, round w/wrench flats head style, 0.625 inches head diameter, head height: 0.160 inches .
Manufacturer part number 218-24402-1 for national stock number 5306001462129.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-146-2129.
-
MPN or Model
218-24402-1
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Left-hand -
Thread Length
0.320 inches -
Fastener Length
0.400 inches -
Head Style
Round w/wrench flats -
Head Diameter
0.625 inches -
Head Height
0.160 inches -
Width Between Flats
0.500 inches -
Thread Diameter
0.312 inches -
Grip Length
0.080 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
190000 pounds per square inch -
Material
Steel comp 630 -
Material Specification
Ams 5643 assn standard single material response -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-141-0366 MPN 216-40036-7Fuselage Section
- 4920-00-230-6878 MPN 215-01536-1Boresigt Target Light Assembly
- 1560-00-407-8235 MPN 215-72457-1Coupling Nut
- 1560-00-450-0251 MPN 215-21061-26Lens Container
- 5935-00-470-9268 MPN CVC6062E6121SWGElectrical Plug Connector
- 1560-00-614-1112 MPN CV15-410921-32Right Fitting Assy
- 4920-00-781-7996 MPN 215-00127-2Flight Control System Test Set
- 1560-00-804-7254 MPN 215-30048-120Aircraft Door
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-146-2129 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
218-24402-1 | Triumph Aerostructures, Llc |