NSN 5306-00-146-7134
Wheel Bolt
Between 1.390 inches and 1.437 inches fastener length, hexagon head style, between 0.390 inches and 0.422 inches head height, width between flats: between 1.053 inches and 1.066 inches .
Manufacturer part number AN12C12A for national stock number 5306001467134.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-146-7134.
-
MPN or Model
AN12C12A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.3 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 1.062 inches and 1.141 inches -
Fastener Length
Between 1.390 inches and 1.437 inches -
Head Style
Hexagon -
Head Height
Between 0.390 inches and 0.422 inches -
Width Between Flats
Between 1.053 inches and 1.066 inches -
Thread Diameter
0.750 inches -
Grip Length
Between 0.296 inches and 0.328 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
16 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Material
Steel comp 431 -
Material Specification
Mil-s-18732 military specification single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-249-5724 MPN AN3102A32-17PElectrical Receptacle Connector
- 5935-00-283-3735 MPN AN3102A24-7PElectrical Receptacle Connector
- 5935-00-283-7197 MPN AN3106E16S1SElectrical Plug Connector
- 1560-00-401-6090 MPN 65209-01010-126Cold Air Vent Duct
- 5940-00-508-3635 MPN AN661-1Terminal
- 5935-00-564-5362 MPN AN3106A14S5SCElectrical Plug Connector
- 5935-00-642-0755 MPN AN3102A10SL4SElectrical Receptacle Connector
- 5305-00-059-3650 MPN AN565BC1032H6Setscrew
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-146-7134 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN12C12A | Aeronautical Standards Group |