NSN 5306-00-150-3075
Shouldered Rivet Ring Bolt
About this product
Between 1.440 inches and 1.560 inches eye inside diameter, between 0.250 inches and 0.310 inches shoulder thickness, between 2.000 inches and 2.120 inches shank length, eye stock diameter: between 0.620 inches and 0.690 inches .
Manufacturer part number MS51937-8 for national stock number 5306001503075.
Datasheet
-
Product description
Eye Bolt NSN 5306-00-150-3075.
-
MPN or Model
MS51937-8
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
1 lb -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
1.620 inches -
Eye Inside Diameter
Between 1.440 inches and 1.560 inches -
Shoulder Thickness
Between 0.250 inches and 0.310 inches -
Shank Length
Between 2.000 inches and 2.120 inches -
Eye Stock Diameter
Between 0.620 inches and 0.690 inches -
Shoulder Diameter
Between 1.120 inches and 1.250 inches -
Overall Length
Between 5.060 inches and 5.500 inches -
Thread Diameter
0.750 inches -
Thready Qty Per Inch (tpi)
10 -
Distance From Center Of Eye To Shank End
Between 3.650 inches and 4.100 inches -
Eye Outside Width
2.810 inches -
Material
Steel -
Material Specification
Mil-b-45908 military specification single material response -
Style Designator
Round, closed w/shoulder -
Thread Series Designator
Unc
More from these suppliers
- 5935-01-608-8345 MPN 810972Electrical Receptacle Connector
- 1680-01-654-5123 MPN 9D02373-1Hcu Operational Nrp
- 5306-01-440-6439 MPN 17SK216-7GMachine Bolt
- 5950-00-018-0988 MPN MS90542-23Radio Frequency Coil
- 5935-00-021-9511 MPN MS3112E12-3PXElectrical Receptacle Connector
- 5975-00-043-3403 MPN MS3368-1-4BElectrical Components Tiedown Strap
- 5940-00-082-4665 MPN MS27249-1B5Terminal Board
- 5935-00-140-6375 MPN MS24266R18T31S7Electrical Plug Connector
Eye Bolt
An externally threaded device whose threaded portion is of one nominal diameter, without a head, but with the unthreaded end either bent more than 225 degrees (3.925 radians) or cast, forged, or punched to resemble an eye. See also bolt, hook. Excludes connector, rod end.
Pricing and Availability
Get a quote for 5306-00-150-3075 eye boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS51937-8 | Military Standards |
52W1172-63 | Engineered Arresting Systems |
52W1172-63 | Bliss E W Co |
52W1172-63 | Eme Elektro-metall Export Gmbh |
5306001503075 | E.c.a Etablissement Central |
Stock Check
Availability for this item was last checked on 09/09/20.
The quantities and conditions available at the time were:
- NS: 4
- NE: 615
- AR: 1