NSN 5306-00-150-3278
Wheel Bolt
2.750 inches fastener length, double hexagon w/hole head style, 0.260 inches head height, width between flats: 0.250 inches .
Manufacturer part number AS9556-MS9556-34 for national stock number 5306001503278.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-150-3278.
-
MPN or Model
AS9556-MS9556-34
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.630 inches and 0.690 inches -
Fastener Length
2.750 inches -
Head Style
Double hexagon w/hole -
Head Height
0.260 inches -
Width Between Flats
0.250 inches -
Extended Washer Diameter
0.375 inches -
Extended Washer Thickness
0.040 inches -
Thread Diameter
0.190 inches -
Grip Length
Between 2.060 inches and 2.120 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
130000 pounds per square inch -
Hardness Rating
248.0 brinell standard and 341.0 brinell standard -
Minimum Yield Strength
85000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams 5731 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-009-4573 MPN MS3116P8-33SElectrical Plug Connector
- 5905-00-141-0723 MPN RCR20G621JPComposition Fixed Resistor
- 5935-00-148-4483 MPN MS3106A20-18SWElectrical Plug Connector
- 5935-00-160-4762 MPN MS3140E19PYElectrical Receptacle Connector
- 5940-00-201-2849 MPN MS20659-2Lug Terminal
- 5935-00-238-0734 MPN MS17346R22C22SElectrical Receptacle Connector
- 5935-00-251-7609 MPN MS3126P20-41PWElectrical Plug Connector
- 5935-00-258-8069 MPN MS3106E28-15PElectrical Plug Connector
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-150-3278 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AS9556-MS9556-34 | Military Standards |
MS9556-34 | Military Standards |
Stock Check
- NE: 1171
- NS: 211
- SV: 3