NSN 5306-00-150-3492
Wheel Bolt
1.562 inches fastener length, double hexagon w/hole head style, 0.260 inches head height, width between flats: 0.250 inches .
Manufacturer part number MS9556-23 for national stock number 5306001503492.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-150-3492.
-
MPN or Model
MS9556-23
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.630 inches and 0.690 inches -
Fastener Length
1.562 inches -
Head Style
Double hexagon w/hole -
Head Height
0.260 inches -
Width Between Flats
0.250 inches -
Extended Washer Diameter
0.375 inches -
Extended Washer Thickness
0.040 inches -
Thread Diameter
0.190 inches -
Grip Length
Between 0.872 inches and 0.932 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
130000 pounds per square inch -
Hardness Rating
248.0 brinell standard and 341.0 brinell standard -
Minimum Yield Strength
85000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams 5731 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-003-4978 MPN MS3102C28-17PElectrical Receptacle Connector
- 5905-00-062-0151 MPN MS35834-396Film Fixed Resistor
- 5905-00-079-3561 MPN MS35834-380Film Fixed Resistor
- 5935-00-093-0430 MPN MS3116P20-39SXElectrical Plug Connector
- 5940-00-113-8183 MPN MS25036-113Lug Terminal
- 5935-00-147-9525 MPN MS116F8-2SElectrical Plug Connector
- 5905-00-171-1985 MPN MS35043-209Composition Fixed Resistor
- 5935-00-198-4041 MPN MS3187A20AElectrical Connector End Seal Plug
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-150-3492 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS9556-23 | Military Standards |