NSN 5306-00-150-9083
Close Tolerance Hex Head Bolt
Between 1.016 inches and 1.064 inches fastener length, between 0.109 inches and 0.141 inches head height, 0.070 inches first hole and 0.080 inches first hole shank unthreaded hole diameter, min. tensile strength (psi): 125000 pounds per square inch.
Manufacturer part number AN173H10 for national stock number 5306001509083.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-150-9083.
-
MPN or Model
AN173H10
-
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Length
Between 0.375 inches and 0.455 inches -
Fastener Length
Between 1.016 inches and 1.064 inches -
Head Height
Between 0.109 inches and 0.141 inches -
Shank Unthreaded Hole Diameter
0.070 inches first hole and 0.080 inches first hole -
Min. Tensile Strength (psi)
125000 pounds per square inch
More from these suppliers
- 5305-00-145-7014 MPN AC503-8-16Machine Screw
- 5306-00-089-1425 MPN 70-8-50Square Neck Bolt
- 5905-00-003-7715 MPN MIL-R-39017/5Film Fixed Resistor
- 5905-00-004-0349 MPN RCR07G224JRComposition Fixed Resistor
- 5905-00-004-6142 MPN RWR80SR620FInductive Wire Wound Fixed Resistor
- 5905-00-004-7650 MPN RNC60H1500FPFilm Fixed Resistor
- 5905-00-006-5570 MPN MIL-R-39017/5Film Fixed Resistor
- 5905-00-007-3829 MPN RNC65J3013BRFilm Fixed Resistor
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-150-9083 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN173H10 | Aeronautical Standards Group |
B6812 | Military Specifications |
83T10 | Department Of The Air Force |
83T10 | Army Air Force Drawings |
Stock Check
- NE: 763
- NS: 505
- SV: 1