NSN 5306-00-150-9099
Close Tolerance Hex Head Bolt
Between 3.015 inches and 3.062 inches fastener length, between 0.109 inches and 0.141 inches head height, 0.070 inches first hole shank unthreaded hole diameter, min. tensile strength (psi): 125000 pounds per square inch.
Manufacturer part number AN173H30 for national stock number 5306001509099.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-150-9099.
-
MPN or Model
AN173H30
-
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Length
Between 0.374 inches and 0.453 inches -
Fastener Length
Between 3.015 inches and 3.062 inches -
Head Height
Between 0.109 inches and 0.141 inches -
Shank Unthreaded Hole Diameter
0.070 inches first hole -
Min. Tensile Strength (psi)
125000 pounds per square inch
More from these suppliers
- 5905-00-003-7715 MPN RLR05C12R0GRFilm Fixed Resistor
- 5905-00-004-2059 MPN RBR56L16402BRNoninductive Wire Wound Fixed Resistor
- 5905-00-004-6039 MPN RBR71L31601BMNoninductive Wire Wound Fixed Resistor
- 5905-00-005-2691 MPN RNC50K20R0FMFilm Fixed Resistor
- 5905-00-005-2883 MPN MIL-R-55182/1Film Fixed Resistor
- 5905-00-006-7041 MPN RNR60C4930DSFilm Fixed Resistor
- 5905-00-006-7052 MPN MILR55182-6Film Fixed Resistor
- 5935-00-009-6381 MPN MILC83723-72Electrical Receptacle Connector
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-150-9099 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN173H30 | Aeronautical Standards Group |
B6812 | Military Specifications |
AN173-30 | Aeronautical Standards Group |