NSN 5306-00-150-9957
Close Tolerance Hex Head Bolt
Between 4.078 inches and 4.125 inches fastener length, undercut hexagon head style, between 0.218 inches and 0.250 inches head height, width between flats: between 0.615 inches and 0.627 inches .
Manufacturer part number AN177H40 for national stock number 5306001509957.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-150-9957.
-
MPN or Model
AN177H40
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.2 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.624 inches and 0.703 inches -
Fastener Length
Between 4.078 inches and 4.125 inches -
Head Style
Undercut hexagon -
Head Height
Between 0.218 inches and 0.250 inches -
Width Between Flats
Between 0.615 inches and 0.627 inches -
Hole Diameter
0.070 inches -
Grip Diameter
Between 0.4362 inches and 0.4367 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole -
Thread Diameter
0.437 inches -
Grip Length
Between 3.422 inches and 3.454 inches -
Hole Quantity
1 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Hole Configuration Style
Hexagon flats -
Distance From Head Largest Bearing Surface To Shank Hole Center
3.906 inches first hole and 3.938 inches first hole -
Surface Finish
63.0 microinches grip -
Material
Steel comp 8740 or steel comp 8630 or steel comp 8735 or steel comp 4037 or steel comp 4130 or steel comp 4140 -
Material Specification
Mil-s-6049 military specification 1st material response or mil-s-6050 military specification 2nd material response or mil-s-6098 military specification 3rd material response or ams 6300 assn standard 4th material response or mil-s-6758 military specification 5th material response or mil-s-5626 military specification 6th material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-201-4544 MPN AN3100E24-28PElectrical Receptacle Connector
- 5935-00-259-6920 MPN AN3100C22-27PElectrical Receptacle Connector
- 5935-00-280-2415 MPN AN3100C32-6PElectrical Receptacle Connector
- 5935-00-552-2668 MPN AN3106A24-28SCElectrical Plug Connector
- 5935-00-148-9330 MPN AN3108B28-1PElectrical Plug Connector
- 5935-00-222-7853 MPN AN3106A28-21PWElectrical Plug Connector
- 5935-00-148-9378 MPN AN3106A14S7SElectrical Plug Connector
- 5925-00-153-4507 MPN AN3160-10Circuit Breaker
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-150-9957 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN177H40 | Aeronautical Standards Group |