NSN 5306-00-151-0160
Wheel Bolt
Between 4.328 inches and 4.375 inches fastener length, hexagon head style, between 0.265 inches and 0.297 inches head height, width between flats: between 0.740 inches and 0.752 inches .
Manufacturer part number AN8-42 for national stock number 5306001510160.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-151-0160.
-
MPN or Model
AN8-42
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.681 inches -
Fastener Length
Between 4.328 inches and 4.375 inches -
Head Style
Hexagon -
Head Height
Between 0.265 inches and 0.297 inches -
Width Between Flats
Between 0.740 inches and 0.752 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole and 0.116 inches first hole -
Thread Diameter
0.500 inches -
Grip Length
Between 3.646 inches and 3.678 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
4.156 inches first hole and 4.188 inches first hole -
Material
Steel -
Surface Treatment
Cadmium or dichromate -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-245-0544 MPN AN3108B22-27PElectrical Plug Connector
- 5930-00-615-9376 MPN AN3027-1AToggle Switch
- 5305-00-182-1271 MPN AN545-2R2Wood Screw
- 5305-00-269-4525 MPN AN526-428R44Machine Screw
- 5305-00-276-1973 MPN AN515-6-2Machine Screw
- 5305-00-282-3399 MPN AN565D416H8Setscrew
- 5305-00-543-4925 MPN AN500A10-14Machine Screw
- 5305-00-638-1815 MPN AN565A3H3Setscrew
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-151-0160 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN8-42 | Aeronautical Standards Group |
Stock Check
- NE: 619
- NS: 136