NSN 5306-00-151-0450
Wheel Bolt
4.031 inches fastener length, hexagon head style, between 0.140 inches and 0.172 inches head height, width between flats: between 0.428 inches and 0.440 inches .
Manufacturer part number AN4-40A for national stock number 5306001510450.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-151-0450.
-
MPN or Model
AN4-40A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.469 inches -
Fastener Length
4.031 inches -
Head Style
Hexagon -
Head Height
Between 0.140 inches and 0.172 inches -
Width Between Flats
Between 0.428 inches and 0.440 inches -
Thread Diameter
0.250 inches -
Grip Length
3.562 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Material
Steel comp 4037 or steel comp 4130 or steel comp 8630 or steel comp 8735 or steel comp 8740 or steel comp 4140 -
Material Specification
Mil-b-6812 military specification all material responses -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type 2, class 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-201-6437 MPN AN3106C24-9SElectrical Plug Connector
- 5935-00-201-7928 MPN AN3102A18-1SElectrical Receptacle Connector
- 5935-00-250-7398 MPN AN3106A24-10PElectrical Plug Connector
- 5935-00-280-1919 MPN AN3102A22-23SElectrical Receptacle Connector
- 5905-00-283-5847 MPN AN3155-50-100Nonprecision Wire Wound Variable Resistor
- 5935-00-500-5316 MPN AN3100A32-3PElectrical Receptacle Connector
- 5935-00-553-2446 MPN AN3102E20-29SCElectrical Receptacle Connector
- 5935-00-642-3705 MPN AN3108E20-29SElectrical Plug Connector
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-151-0450 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN4-40A | Aeronautical Standards Group |