NSN 5306-00-151-0657
Aircraft Clevis Bolt
About this product
Between 3.531 inches and 3.563 inches fastener length, button head style, between 0.859 inches and 0.891 inches head diameter, head height: between 0.234 inches and 0.266 inches .
Manufacturer part number AN28-56 for national stock number 5306001510657.
Datasheet
-
Product description
Clevis Bolt NSN 5306-00-151-0657.
-
MPN or Model
AN28-56
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.390 inches and 0.454 inches -
Fastener Length
Between 3.531 inches and 3.563 inches -
Head Style
Button -
Head Diameter
Between 0.859 inches and 0.891 inches -
Head Height
Between 0.234 inches and 0.266 inches -
Groove Diameter
Between 0.417 inches and 0.427 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole and 0.116 inches first hole -
Single Shear Strength
14700 pounds per square inch -
Internal Drive Style
Slot -
Thread Diameter
0.500 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
3.359 inches first hole and 3.391 inches first hole -
Material
Steel comp 8740 or steel comp 8630 or steel comp 8735 or steel comp 4140 or steel comp 4130 or steel comp 4037 -
Material Specification
Mil-s-6049 military specification 1st material response or mil-s-6050 military specification 2nd material response or mil-s-6098 military specification 3rd material response or mil-s-5626 military specification 4th material response or mil-s-6758 military specification 5th material response or mil-s-8695 military specification 6th material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 3 federal specification single treatment response -
Thread Series Designator
Unf -
Departure From Cited Document
Thread t per mil-s-7742 except major diameter is not to exceed max allow bolt shank dia
More from these suppliers
- 5940-01-384-3892 MPN NAS1063A8TB98TTerminal Board Marker Strip
- 5305-00-012-8226 MPN MS51851-136Tapping Screw
- 5305-00-032-3692 MPN NAS1352-06LL10PSocket Head Cap Screw
- 5305-00-032-3955 MPN NAS1153-38Close Tolerance Screw
- 5305-00-053-8967 MPN NAS1352C08-4Socket Head Cap Screw
- 5305-00-234-9732 MPN NAS1190E4P8NSocket Head Cap Screw
- 5305-00-269-4216 MPN MS24694S158Machine Screw
- 5305-00-282-8694 MPN NASM565AC6H4Setscrew
Clevis Bolt
An externally threaded fastener whose threaded and unthreaded portions are of one nominal diameter and are separated by a narrow circumferential groove. The head is designed to be held or driven with an inserted driver. Excludes bolt, shear.
Pricing and Availability
Get a quote for 5306-00-151-0657 clevis boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN28-56 | Aeronautical Standards Group |
AN21 THRU AN36 | National Aerospace Standards |
NASM6812 | National Aerospace Standards |
Stock Check
Availability for this item was last checked on 08/02/21.
The quantities and conditions available at the time were:
- NS: 79
- NE: 82