NSN 5306-00-151-0717
Wheel Bolt
3.156 inches fastener length, hexagon head style, between 0.203 inches and 0.234 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number NASMS2007-04-31 for national stock number 5306001510717.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-151-0717.
-
MPN or Model
NASMS2007-04-31
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.499 inches -
Fastener Length
3.156 inches -
Head Style
Hexagon -
Head Height
Between 0.203 inches and 0.234 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Hole Diameter
0.062 inches -
Thread Diameter
0.250 inches -
Grip Length
2.625 inches -
Hole Quantity
6 -
Hole Type
Drilled -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Hole Configuration Style
Hexagon flats -
Material
Steel -
Surface Treatment
Cadmium and chromate -
Thread Series Designator
Unf
More from these suppliers
- 5935-01-605-9682 MPN NAS1641R12T12Electrical Receptacle Connector
- 5305-00-052-1457 MPN MS35308-3Hexagon Head Cap Screw
- 5305-00-053-1523 MPN NAS1190C04P4Socket Head Cap Screw
- 5305-00-206-3274 MPN NAS333PA4-5Machine Screw
- 5305-00-253-5623 MPN MS21318-42Drive Screw
- 5305-00-470-9018 MPN NAS514P632-18PMachine Screw
- 5305-00-486-2136 MPN NAS1221-08-6Machine Screw
- 5305-00-508-2574 MPN NAS1152E2Close Tolerance Screw
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-151-0717 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NASMS2007-04-31 | National Aerospace Standards |
AN74-31 | Aeronautical Standards Group |
MS20073-04-31 | Military Standards |
B6812 | Military Specifications |