NSN 5306-00-151-1095
Wheel Bolt
Between 5.641 inches and 5.688 inches fastener length, hexagon head style, between 0.140 inches and 0.172 inches head height, width between flats: between 0.428 inches and 0.440 inches .
Manufacturer part number AN4-55A for national stock number 5306001511095.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-151-1095.
-
MPN or Model
AN4-55A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.438 inches and 0.516 inches -
Fastener Length
Between 5.641 inches and 5.688 inches -
Head Style
Hexagon -
Head Height
Between 0.140 inches and 0.172 inches -
Width Between Flats
Between 0.428 inches and 0.440 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 5.172 inches and 5.203 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Material
Steel comp 4140 or steel comp 8740 or steel comp 8630 or steel comp 4130 or steel comp 4037 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-280-2442 MPN AN3108A22-19SElectrical Plug Connector
- 5935-00-549-4490 MPN AN3106B24-5SElectrical Plug Connector
- 5945-00-642-2874 MPN AN3311-1Electromagnetic Relay
- 5945-00-665-7133 MPN AN3340-2Electromagnetic Relay
- 5940-01-200-6999 MPN AN3436-2-9Terminal Board
- 5305-00-011-7624 MPN AN515UB4-20Machine Screw
- 5305-00-061-4755 MPN AN565A1032H7Setscrew
- 5305-00-151-1236 MPN AN515-6R18Machine Screw
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-151-1095 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN4-55A | Aeronautical Standards Group |